IBM 4mm DDS-2 Tape Autoloader, Installation And User Manual

Page: 32 / 52

2. Insert the cartridge magazine into the slot in the front of the Autoloader with the
large arrow on the magazine facing up and pointing towards the Autoloader.
Apply steady pressure until the mechanism takes the magazine and pulls it into
the Autoloader.
Ejecting a Magazine
To eject the magazine, press the Eject button. When you do this:
1. If a tape is loaded, the tape will rewind to the beginning of the partition (BOP).
2. If the tape is write-enabled, the updated copy of the Tape log is written back to
tape.
3. The tape rewinds to BOM and is unthreaded.
4. The changer replaces the cartridge in the magazine.
5. The magazine is ejected.
5-4
4mm DDS-2 Tape Autoloader Installation and User's Guide