IBM 4951-514, Installation Manual

Page: 21 / 36

Chapter 4. Installing the Windows 2000/Windows XP and
WEPOS drivers
The SurePOS 500 contains many components, which need specialized drivers in
order to function properly. The following drivers must be installed in the order
shown. Also, reboot the system between each driver installation.
You can always find the latest supported drivers for the SurePOS 500 at the IBM
Retail Store Solutions support site, www.ibm.com/solutions/retail/store/support. This
is the only supported source of drivers for the SurePOS 500.
SurePOS 500 required drivers
Each driver package contains its own installation instructions. The default settings
provided during the installation are sufficient.
v VIA 4 in 1 Driver
v
Ethernet Driver
v Video Driver
v
Touch Screen Driver
v Windows Operating System Patches: Visit the Microsoft Windows Update support
site for the latest patches at http://windowsupdate.microsoft.com/
Attention: Failing to install all of the required drivers might have an adverse
impact on the stability and/or performance of the system.
Note: Even though a Serial ATA controller is used, no additional system drivers are
required since the Serial ATA controller is configured to run in IDE emulation
mode.
© Copyright IBM Corp. 2005
9