IBM 37L1388, User Manual

Page: 28 / 62

Manually ejecting a CD
If you press the Eject/Load button and the tray does not slide out, turn off the
computer and straighten a large paper clip to form a tool, as shown in the illustration.
The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end
into the manual-eject hole on the front of the drive (see “Front view of the drive” on
page 1-3). Push the paper clip until the tray opens. Gently pull out the tray until you
can remove the CD.
45 mm
1.8 in
Playing an audio CD
To play an audio CD, you must have an audio-CD program installed in your computer.
If you are using the 40X-17X Internal IDE CD-ROM Drive with DOS, there is a
program included on the Option Diskette that will allow you to play audio CDs.
Windows 3.x, Windows 95, Windows 98, Windows NT, and OS/2 all come with
multimedia extensions that include audio CD player programs.
Follow the procedures below which correspond to your operating system. For more
information on using your audio playback software, see the documentation that comes
with your operating system or your computer.
Windows 95 or Windows 98
To use the Windows 95 or Windows 98 audio utility:
1. Turn on your computer and start your operating system, if you have not already
done so.
2. Insert an audio CD into the CD-ROM drive.
3. Click Start --> Programs --> Accessories --> Multimedia --> Media Player.
4. When the Media Player window opens, double-click the Media Player icon.
5. Double-click Device.
6. Double-click CD Audio.
If you do not see the Media Player or CD Audio icons within the Media Player
folder, you must install the Windows CD Audio device driver as follows:
1. Double-click My Computer --> Control Panel --> Multimedia.
2. Click the Advanced tab.
3. Double-click Media Control Devices --> CD Audio Devices.
4. Make sure that the CD device driver is enabled. If the driver is not present or is
disabled, install the driver.
2-4 40X-17X Internal IDE CD-ROM Drive