© Copyright IBM Corporation 2019, 2020. Customer Install Guide, 2U Chassis
10
Each rack cabinet might have more than one power cord.
For AC powered racks, be sure to disconnect all power cords in the rack cabinet when
directed to disconnect power during servicing.
For racks with a DC power distribution panel (PDP), turn off the circuit breaker that
controls the power to the system unit(s), or disconnect the customer’s DC power
source, when directed to disconnect power during servicing.
Connect all devices installed in a rack cabinet to power devices installed in the same
rack cabinet. Do not plug a power cord from a device installed in one rack cabinet into a
power device installed in a different rack cabinet.
An electrical outlet that is not correctly wired could place hazardous voltage on the
metal parts of the system or the devices that attach to the system. It is the responsibility
of the customer to ensure that the outlet is correctly wired and grounded to prevent an
electrical shock. (R001 part 1)
R007
CAUTION: Use safe practices when lifting.
L001
