IBM 3000 6.0.2, Service Manual

Page: 20 / 88

Table 4. Events for the Enclosure component (continued)
Event Event Type Severity Message Description Cause User Action
temp_low_warn STATE_CHANGE WARNIN
G
Temperature
sensor {0}
measured a low
temperature value.
The temperature
has fallen below
the actual low
warning threshold
value for at least
one sensor.
N/A N/A
temp_sensor_failed STATE_CHANGE WARNIN
G
Temperature
sensor {0} is failed.
The temperature
sensor state is
failed.
N/A N/A
temp_sensor_ok STATE_CHANGE INFO Temperature
sensor {0} is ok.
The temperature
sensor state is ok.
N/A N/A
voltage_bus_failed STATE_CHANGE WARNIN
G
Voltage sensor {0}
I2C bus is failed.
The voltage sensor
I2C bus has failed.
N/A N/A
voltage_high_critical STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a high
voltage value.
The voltage has
exceeded the
actual high critical
threshold value for
at least one sensor.
N/A N/A
voltage_high_warn STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a high
voltage value.
The voltage has
exceeded the
actual high warning
threshold value for
at least one sensor.
N/A N/A
voltage_low_critical STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a low
voltage value.
The voltage has
fallen below the
actual low critical
threshold value for
at least one sensor.
N/A N/A
voltage_low_warn STATE_CHANGE WARNIN
G
Voltage sensor {0}
measured a low
voltage value.
The voltage has
fallen below the
actual low warning
threshold value for
at least one sensor.
N/A N/A
voltage_sensor_failed STATE_CHANGE WARNIN
G
Voltage sensor {0}
is failed.
The voltage sensor
state is failed.
N/A N/A
voltage_sensor_ok STATE_CHANGE INFO Voltage sensor {0}
is ok.
The voltage sensor
state is ok.
N/A N/A
Physical disk events
The following table lists the events that are created for the Physical disk component.
Table 5. Events for the physical disk component
Event Event Type Severity Message Description Cause User Action
gnr_nvram_degraded STATE_CHANGE WARNING The NVDIMM of the
pdisk {0} is degraded.
The NVRAM drive of
the disk is in
degraded state.
The tslsnvramstatus
command shows
degraded state for the
NVRAM drive of the disk.
N/A
gnr_nvram_disarmed STATE_CHANGE ERROR The NVDIMM of the
pdisk {0} is disarmed.
NVDIMM is unable to
preserve future
content.
The tslsnvramstatus
command reports
disarmed failure
condition for the NVRAM
drive of the disk.
Identify the
NVDIMM cards or
BPM, which
encountered the
errors from FSP log
or call home data,
and replace the
faulty NVDIMM
cards, BPM or both
as soon as possible.
8 IBM Elastic Storage System 3000: Service Guide