IBM 2283, Hardware Maintenance Service

Page: 44 / 213

12 IBM Desktop System HMM
The following table lists specific keys on the keyboard
that will help you move through the Configuration/
Setup Utility Menus:
Changing Parameter Settings
In the Configuration/Setup Utility Menus, the
configuration information that you can change is
enclosed in brackets like these: [ ]. You cannot
change any information that is not enclosed in
brackets or is shown in grey instead of black color.
Use the up- or down- arrow keys to highlight options
then press
Enter
to display a menu. When changing
the setting of a particular parameter, highlight the
setting then use the - or + arrow key to change the
setting. Refer to the Configuration/Setup Utility help
for details on the configured parameters in each
menu.
Keys Function
F1 Press this key if you want help for a
selected menu option.
Up or Down
arrow key Use these arrow keys to go up and
down for highlighting an option on
the menu. (Press the Enter key to
choose the option.)
-/+ Press this key to change parameter
settings.
F9 Restore setup defaults
Esc After viewing or making changes to
the settings on a menu, press this
key to exit the menu.
<-- or --> Use these arrow keys to go left and
right for highlighting an option on
the menu. (Press the Enter key to
choose the option.)
Enter Press this key to choose a
highlighted option from a menu, or
select sub-menu.
F10 Press this key if you want to save
and exit the current settings for a
line