IBM 2109 Model M12, User Manual

Page: 41 / 97

v
An air flow of at least 350 cubic feet per minute per switch, available in the
immediate vicinity of the 2109 Model C36 with Model M12.
v
The power specifications listed in “Power specifications”.
v
The environmental specifications listed in “Environmental requirements” on
page 22.
v
Interference less than the standard levels listed in Table 15 on page 22, under
Immunity.
Power specifications
CAUTION:
To remove power to the 2109 Model M12, disconnect both power cables. (5)
The 2109 Model C36 with Model M12 supports F_port, FL_port, and E_port
connections and distributed name server (DNS). It is electro-magnetic compatibility
(EMC) compliant.
The power supplies are universal and capable of functioning worldwide without
using voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage
requirements and are autoranging in terms of accommodating input voltages and
line frequencies. Each power supply has its own built-in fan for cooling, pushing the
air towards the port side of the chassis.
The power specifications listed in Table 13 are calculated for fully-loaded systems
with four power supplies. A fully-loaded system has eight 16-port cards, two CP
cards, and three blower assemblies.
Table 13 lists the power specifications for the 2109 Model C36 with Model M12.
Table 13. Power specifications
Specification Value
Total power available from each power
supply 1 KW
Input voltage 200 - 240 V ac
Input line frequency 50 - 60 Hz
Harmonic distortion Active power factor correction per
IEC1000-3-2
Heat output (BTU rating)
v
64 ports: 1080 watts, 3690 BTU per hour
v
128 ports : 1960 watts, 6700 BTU per
hour
Maximum inrush current per power cord 40 amps Peak
Input line protection Thermal circuit breaker
Power supply dimensions 6.96 cm (2.74 in.) wide, 12.34 cm (4.86 in.)
high, 34.29 cm (13.50 in.) long
Appendix A. Product specifications
21