IBM 200 GB LTO-2, User Manual

Page: 58 / 104

Note: The codes on the single-character display have different meanings,
depending on whether they display during normal operations or while the
drive is in maintenance mode. Codes that occur during normal operations
are defined in Table 8 on page 49. Codes that occur while in maintenance
mode are defined in Table 5 on page 36.
Table 7. Methods of receiving errors and messages for the IBM TotalStorage LTO Ultrium 2 Tape Drive
If the error or message was
presented by.... Do this....
The enclosure’s display (if the tape
drive is enclosed in a library or
autoloader) Refer to the documentation for the enclosure.
The tape drive’s single-character
display and the status light flashes
amber See Table 8 on page 49. To determine the meaning of status light activity, see
“Status light” on page 32.
The tape drive’s single-character
display and the status light is solid
amber See Table 5 on page 36. To determine the meaning of status light activity, see
“Status light” on page 32.
SCSI log sense data (such as
TapeAlert flags) or SCSI drive sense
data See Appendix B, “TapeAlert flags”, on page 71, Table 8 on page 49.
Drive sense data sent to a library (if
the tape drive is enclosed in a
library) Refer to your library’s documentation, then see Table 8 on page 49.
The tape drive’s error log See Table 8 on page 49.
48
IBM 200/400GB LTO-2 Tape Drive: User’s Guide