IBM 1454, Setup Manual

Page: 11 / 44

11
Set up the printer and paper handling options
Printer setup
If you only purchased a base printer with no options, follow the directions under
“Positioning the printer” on page 13.
Note:
Be sure to set up the items in the
order listed in the table.
Use the following table to locate the instructions you need to set up your printer and any
paper handling options you may have purchased.
Installing a 2000-sheet
drawer
Your printer supports one optional 2000-sheet drawer.
Warning:
If you have an optional
duplex unit and a 2000-sheet drawer, you
must install a 500-sheet drawer between
the duplex unit and the 2000-sheet
drawer.
1
Unpack the 2000-sheet drawer and remove any packing material.
2
Place the drawer in the location you have chosen for your printer.
3
If you are installing a 500-sheet drawer on top of the 2000-sheet drawer, attach
the stabilizing bars:
a
Place the two stabilizing bars on the ground, narrow side up.
b
Lower the 2000-sheet drawer onto the bars, making sure you align the holes
in the drawer with the holes in the bars.
c
Screw the bars into place using four screws (two screws for each bar).
4
Adjust the four leveling feet on the bottom of the drawer, if necessary.
Note:
You will install the power cord for
the 2000-sheet drawer later.
5
Continue with “Installing a 500-sheet drawer” on page 12 or “Positioning the
printer” on page 13.
Topic Go to page...
Installing a 2000-sheet drawer 11
Installing a 500-sheet drawer 12
Installing a duplex unit 13
Positioning the printer 13
Installing an output expander 14
Installing a 5-bin mailbox 15
Leveling feet