Installing the shipping bracket on the UPS
You must install the shipping bracket on the front of the UPS before the UPS is shipped installed in a
rack cabinet. The shipping bracket provides extra protection for the UPS during shipment.
To install the shipping bracket, complete the following steps:
1.
If the UPS bezels are installed, remove the lower front bezel. Press the two side latches toward each
other to release the bezel, and pull the bezel away. Keep the bezel.
OK
OK
100%
6
min
2.
Make sure that the UPS internal batteries are disconnected. For more information, see the
Installation
and Maintenance Guide
on the IBM
Documentation
CD that comes with the UPS.
3.
Remove the four screws that secure the front of the UPS to the rack cabinet. Keep the four screws.
4.
Align the shipping bracket with the lower front of the UPS, with the support lip under the UPS.
OK
OK
100%
6
min
Shipping bracket
5.
Secure the shipping bracket and the UPS to the rack cabinet with the four screws that you removed in
step 3.
6.
To attach the UPS lower front bezel, press the two side latches toward each other, align the bezel over
the shipping bracket, and snap it into place.
10
