performance. For further AFT details, read the AFT.TXT help file in
the A:\INFO\GENERAL directory of the Diagnostics and Help
diskette.
About DHCP/RPL Support with the Adapters
With the onboard ROM on the 10/100 EtherJet PCI Adapter with
Wake on LAN, or the optional ROM module on the 10/100 EtherJet
PCI Adapter, the following support and features are provided:
¹
The adapters can support DHCP remote boot with DHCP flash
code or RPL remote boot with RPL flash code.
|
¹
The DHCP LANDesk Service Agent (LSA) code supports both
|
Intel's LANDesk Configuration Manager (LCM) and the IBM LAN
|
Client Control Manager 2.x (LCCM 2.x).
|
The RPL code supports RPL remote boot with IBM LAN Client
|
Control Manager 1.1 or 2.x (LCCM 1.1 or LCCM 2.x).
¹
The flash diskette provided gives you the option to load the
Flash Module with DHCP code or with RPL code.
You can download this diskette from the Web at:
http://www.networking.ibm.com/nes/nesether.htm.
Select EtherJet 10/100 PCI Adapters and then look for the
DHCP/RPL flash diskette ETPFLSH.EXE.
For further information regarding the DHCP/RPL option, see
Chapter 3, “Dynamic Host Configuration Protocol and Remote
Program Load.”
Prerequisite Operating System PCI Updates
Please check with your operating system supplier for the latest
information concerning required updates to support PCI adapters.
Some currently available operating systems are not PCI-aware, so
the device drivers for the IBM 10/100 EtherJet PCI Adapters are
written to the PCI-architected BIOS or register-level interfaces.
1-4
10/100 EtherJet PCI Adapters
Title: ASB3CNTL CreationDate: 07/16/98 18:07:52
