IBM 10/100 EtherJet, User Manual

Page: 31 / 55

Advanced information
Command Description
\A Select maximum MNP block size:
\A0: 64 characters.
\A1: 128 characters.
\A2: 192 characters.
\A3: 256 characters.
\B Transmit break to remote:
\Bn: Break length in 100ms units (n=1-9, default: 3).
\G Modem port flow control:
\G0: Modem process XON/XOFF flow control characters locally (default).
\G1: Modem process XON/XOFF flow control characters.
\J Adjust bits rate control:
\J0: Buffer mode. Error control selected by \Nn command (default).
\J1: Force the max DCE rate to the DTE rate.
\K Send break control:
When the modem, operating in data transfer mode, receives a break from the DTE.
\K0: Enter on-line command mode: do not send break to the remote modem.
\K1: Clear data buffers and send break to remote modem.
\K2: Same as 0.
\K3: Send break to remote modem immediately.
\K4: Same as 0.
\K5: Send break to remote modem in sequence with transmitted data (default).
When the modem is in the on-line command state during a data connection, and the \B is received in
order to send a break to the remote modem.
\K0: Clear data buffers and send break to remote modem.
\K1: Clear data buffers and send break to remote modem (same as 0).
\K2: Send break to remote modem immediately.
\K3: Send break to remote modem immediately (same as 2).
\K4: Send break to remote modem in sequence with data.
\K5: Send break to remote modem in sequence with data. (same as 4) (default)
When there a break is received from a remote modem during a connection.
\K0: Clear data buffers and send break to the DTE.
\K1: Clear data buffers and send break to the DTE (same as 0).
\K2: Send break to remote modem immediately.
\K3: Send break to remote modem immediately (same as 1).
\K4: Send break in sequence with received data to DTE.
\K5: Send break in sequence with received data to DTE (same as 4) (default).
\N Error control mode selection:
\N0: Buffer mode. No error control (same as &Q6).
\N1: Direct mode.
\N2: MNP or disconnect mode.
\N3: V.42, MNP or buffer (default).
\N4: V.42 or disconnect.
\N5: V.42, MNP or buffer (same as \N3).
\N7: V.42, MNP or buffer (same as \N3).
Using the modem
21