Chapter 4. Diagnostics and Troubleshooting 4-9
April 20, 1999 10:38 am
PCIIRQ
Forces the driver to use PCI IRQ routing. Some CardBus
bridges have the capability of supporting both PCI and
ISA style IRQ routing. The driver automatically
determines the best choice for this option unless this
keyword is used as an override.
PORT
(ODI driver) See IOADDRESS.
RXBUFFERSIZE
Sets size of the EtherJet CardBus Ready Port Adapter
with Modem receive packet buffer. This is a number in
decimal in the range 1– 30 for 16-bit drivers and 1–100
for the 32-bit ODI driver. Each packet adds approximately
1520 bytes to the resident size of the driver.
SINT
(Packet Driver) A number from hexadecimal 60 to 80
designating a software interrupt.
SOCKET
(16-bit DOS Drivers) Identifies the number of the host
computer PC Card slot into which the EtherJet CardBus
Ready Port Adapter with Modem is inserted. If a socket
number is specified, only the specified socket is checked
for the EtherJet CardBus Ready Port Adapter with
Modem. If no socket is specified, all sockets are
searched until the EtherJet CardBus Ready Port Adapter
with Modem is found.
SOCKET
(For 32-bit NDIS3 Driver IBMC.SYS) Identifies the
number of the host computer’s PC slot or socket into
which the EtherJet CardBus Ready Port Adapter with
Modem is inserted. Valid parameters are AutoDetect, 1,
2, 3, and 4. If a socket number is specified, only the
specified socket is checked for the EtherJet CardBus
Ready Port Adapter with Modem. Under AutoDetect, the
driver will automatically check all slots for the EtherJet
CardBus Ready Port Adapter with Modem.
fhf0mstr.book Page 9 Tuesday, April 20, 1999 10:39 AM
