IBM 10/100 EtherJet CardBus Adapter, Installation And Planning Manual

Page: 27 / 64

Windows 95 and Windows 98 Installation 2-5
12. Shut down Windows 95 OSR2 and power off the machine.
Remove the EtherJet CardBus Adapter physically from the
PC Card slot (make a note of whether the adapter was in the
top or bottom PC Card slot).
13. Restart Windows 95 OSR2. When all disk drive activity has
stopped, reinsert the Adapter in the PC Card slot from which
you removed it in step 12.
14. Click Start button, select Settings , and then Control Panel .
Double-click Add New Hardware . When asked,
Do you want Windows to search for your new hardware?,
select NO and click Next .
15. Select Network adapters and click Next . Under Manufactur-
ers, select IBM and click the Have Disk button.
16. Insert the IBM CD-ROM and select path\ in the Input box,
where path\ is the drive containing the IBM CD-ROM. Click
OK .
17. Select IBM 10/100 EtherJet CardBus Adapter manual
load , click OK , click OK again, click Next , and then Finish .
The PC Card (PCMCIA) Wizard appears. A copy of the Win-
dows 95 OSR2 CAB files should already be on the machine.
18. When asked,
Are you using a PC card to install Windows?,
select No .
19. When asked,
Do you want to review your system files ..?,
select No . Click Next and then Finish .
20. Select Yes to shut down the computer. Windows 95 OSR2
will add the IBM Adapter in Device Manager and under Net-
work components. Depending on the installation, you might
be prompted for the Windows 95 OSR2 diskettes or CD-ROM
to set up a basic Microsoft network.
Windows 95 OSR2 includes 32-bit Clients for:
1. Microsoft Networks
2. NetWare Networks
fcp1mst.book Page 5 Wednesday, June 2, 1999 4:02 PM