LED FLOODLIGHT WITH MOTION DETECTOR
Safety Instructions
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future
reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Always make sure that you are connecting t
o the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the bottom of the fixture.
• Always dis
connect from power source before servicing.
• Maximum ambient temperature (Ta) is 104
°
F (40
°
C). Do not opera
te the fixture at temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
•
Don’t connect the device to a dimmer pack.
• M
ake sure the power cord is never crimped or damaged.
• Never disconnect
the power cord by pulling or tugging on the cord.
• A
void direct eye exposure to the light source while it is on.
• This unit must be connected to an earthed mains outlet that delivers
a voltage of 220-240Vac 50/60Hz.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall
be destroyed.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
OPERATION
Plug the unit into a mains outlet and it will light up immediately. After use, unplug it from the mains.
MOTION DETECTOR
The motion detector features 3 buttons:
LUX
Button: Adjusts the light sensitivity of the sensor. The more you turn the knob towards the moon icon, the
darker it has to be before the light is triggered.
TIME
button: Sets the operating duration when the sensor is triggered. The adjustment range reaches from 55
seconds ±2 secs to 6 minutes ±1 minute.
SENS
button: Adjusts the sensitivity of the sensor. If you set the sensitivity to the max, it will detect motion up to
12m distance. The lower the sensitivity, the shorter is the detection range.
Specifications of the sensor:
Detection range ....................................................................................................................... 180°
Detection distance .............................................................................................
12m max (at 25°C)
Ambient illumination ................................................................................ 2 –
2000lux (adjustable)
Working temperature ................................................................................................ -10°C - +40°C
Operating humidity ......................................................................................................... <93% R.H.
Material .............................................................................................................. Fire retardant ABS
Mounting height ............................................................................ 1.8m – 2.5m above the ground
GB
©Copyright LOTRONIC 2014
Page 2
