Ibiza LEDBAR252, Instruction Manual

Page: 6 / 36

© Copyright LOTRONIC 2012 LEDBAR252 Page 6
CH2 Speed 000 - 255 Speed effect from slow to fast
7 / 10 / 31 channels mode
DMX CHANNEL FUNCTION DMX VALUE 7 CHANNELS 10 CHANNELS 31 CHANNELS
CH 1
Operating mode 000 – 010
011 – 042
043 – 084
085 – 127
128 – 191
192 - 255
No function
7 Channels mode
31 channels mode
10 channels mode
2 channels mode
Sound active mode
No function
7 Channels mode
31 channels mode
10 channels mode
2 channels mode
Sound active mode
No function
7 Channels mode
31 channels mode
10 channels mode
2 channels mode
Sound active mode
CH2 Dimmer 000 - 255 Dimmer ( 0 – 100% ) Dimmer ( 0 – 100% ) Dimmer ( 0 – 100% )
CH3
Strobe 000
001 - 255
No function
Strobe ( from slow to fast )
No function
Strobe ( from slow to fast )
No function
Strobe ( from slow to fast )
CH4 000 - 255 Global Red intensity Pixel 1 Global intensity Pixel 1 Red intensity
CH5 000 - 255 Global Green intensity Pixel 2 Global intensity Pixel 1 Green intensity
CH6 000 – 255 Global Blue intensity Pixel 3 Global intensity Pixel 1 Blue intensity
CH7 000 - 255 Global White intensity Pixel 4 Global intensity Pixel 1 White intensity
CH8 000 - 255 / Pixel 5 Global intensity Pixel 2 Red intensity
CH9 000 - 255 / Pixel 6 Global intensity Pixel 2 Green intensity
CH10 000 - 255 / Pixel 7 Global intensity Pixel 2 Blue intensity
CH11 000 - 255 / / Pixel 2 White intensity
…. …. …. …. …. ….
CH28 / / Pixel 7 Red intensity
CH29 / / Pixel 7 Green intensity
CH30 / / Pixel 7 Blue intensity
CH31 / / Pixel 7 White intensity
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions
depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems
have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION : Disconnect from mains before starting maintenance operation!
CLEANING AND USING FREQUENCY OF PRODUCT
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light
clean. Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use
the high quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or
chemical solvent. The inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced,
find out the faulty and restart the light. But please note the repair must be handled by professional.