©Copyright LOTRONIC 2016
LED8-MINI
Page 28
Sound sensitivity
1. Press the MENU button until “
SENS
” is displayed, press ENTER.
2. A number between 0-
100 will be displayed. Press the UP or DOWN buttons to adjust the sou
nd sensitivity. 0 being
the least sensitive and 100 being the most sensitive. When you have found your desired setting press ENTER to
confirm.
Display back light
1. Press the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or DOWN buttons to select “
ON
” to keep the LED display
on at all times, or “
OFF
” to switch to have the LED display switch off after 2 minutes.
3. Press ENTER and then press and hold the MENU button
for at least three seconds to confirm.
Display Reverse 180°
1. Press the either the MENU button until “
DISP
” is displayed, press ENTER.
2. Press the UP button to select “
DSIP
” to reverse the display, or “
DISP
” to change the display back.
3. Press ENTER to confirm.
Pan Inversion
1. Press the MENU button until “
PINT
” is displayed, press ENTER. Either
“YES”
or
“NO”
will be displayed.
2. To activate the Pan
inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Tilt inversion, select NO and press Enter.
Tilt Inversion
1. Press the MENU button until “
TILT
” is displayed, press ENTER. Either
“YES”
or
“NO”
will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Tilt inversion, select NO and press Enter.
Self test program
1. Press the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
Reset
1. Press the MENU button until “
Reset
” is displayed. Press the ENTER button and the unit will reset itself.
DMX CHANNELS
10 channel definition table
Channel
DMX Value
Function
1
0---255
Y1
2
0---255
Y2
3
0---255
Dimmer 0-100%
4
Strobe
000-007
Close strobe
008-015
Open strobe
016-131
Strobe from slow to fast
