191-220
From right to left move
221-255
Right and left in-phase move
Channel 6
Vertical
move
1~160
Manual
161~190
From down to up
191~220
From up to down
221~255
Up and down in-phase move
Channel 7
Zoom(+/-)
pattern size
0-255
pattern size change/zoom in or out
Channel 8
Colour
selection
0-17
RGB
18-35
Red
36-53
Red + Green (yellow)
54-71
Green
72-89
Green + Blue (cyan)
90-107
Blue
108-120
Blue + Red (pink)
121-136
7 colors in section
137-199
7 colors in s flowing
200-255
Color changing by sound
Channel 9
Colors
moving
0-255
From slow to fast
Channel 10
Axis Y
rotation
0-255
Axis Y rotation
Channel 11
Axis X
rotation
0-255
Axis X rotation
Channel 12
Axis Z
rotation
0-255
Axis Z rotation
Channel 13
Motor
resetting
0-199
No resetting
200-255
XY motor resetting
When the channel 2 is set to static pattern for manual (0--34)
only, the following channel is valid.
Maintenance
☆
Please clean the lens regularly. Do not do it using the wet cloth or other
chemical. the clean times is depend on the using frequency and
surrounding condition; it is recommended that should be cleaned every 20
days;
☆
Please clean the lighting surface and engine outlet regularly.
☆
Be sure that there is no flammable or explosive subject nearby. The least
distance is 0.5 meters. at the same time, keep more than 15cm between
the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS 3 B. it’s dangerous for
observing laser. The safe minimum distance is 13cm,the safe maximum
© Copyright Lotronic 2015 4