©Copyright LOTRONIC 2013
DJM200USB
3
SAFETY RECOMMENDATIONS
MAGNETIC FIELD
CAUTION
! Do not locate sensitive high gain equipment such as preamplifiers or tape decks directly above or below
the unit. This unit has a strong magnetic field which can induce hum into unshielded devices that are located nearby.
The field has strongest spots just above and below the unit. Locate the amplifier at the bottom of the rack and the
preamplifier or other sensitive equipment at the top.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
To prevent electric shock, do not remove top or bottom covers. No user serviceable parts inside. Refer servicing to
qualified servicing personnel. Disconnect power cord before removing back panel cover to access gain switch.
WARNING
! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
The exclamation point triangle is used to alert the user to important operating or maintenance instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
Controls
1.
USB STICK SOCKET
USB stick input.
2.
USB CONTROLS
USB player transport controls
a: |<< : Use this button to re-start the track or to select the previous track.
b: Play/Pause: Each time you press this button, the operation changes from play to pause or from pause to play.
c: >>|: Use this button to select the next track.
d: VOL-: Use this button to
control level down.
e: VOL+(28): Use this button to
control level UP.
f: EQ(29):Allow you to select the effect.
g: LED DISPLAY(30):
Display to MP3's information.
3.
Phono/Line/MP3 button
Use this button to select the input to be sent to the individual channel.
4.
Cue Button
Use this button in order to select the channel(s) to be monitored by headphones.
5.
Treble Control
Used to increase or lower the HIGHS of the input channel.
GB