Manual - DJLIGHT65
3
www.ibiza-light.com
EN
Connections
1. Power supply input: Attach the IEC mains cable here. Built-in fuse
2. DMX input: 3-pin XLR connector for DMX512 signal input
3. DMX output: 3-pin XLR connector for DMX512 signal output
4. LED display: Display of the functions and menu buttons to control the operating mode
5. MENU buttons: See below for operation
6. Mic: Built-in microphone for sound controlled operation
7. PAR can mounts: Attach the PAR cans to the controller bar at the 2 points shown
8. PAR & Laser connections: Connect the PAR & laser at the 2 points shown
9. Light stand socket: Tighten the screw to secure the controller bar to the light stand
10. Laser mounts: Fasten the Laser units to the controller bar at the 2 points shown.
MENU BUTTONS
You can set the operating mode of the unit via the 4 function buttons on the controller bar. Press the MENU
button to display the different functions (see table below for a detailed description of the functions). Use the UP
and DOWN arrow buttons to make your selection. Once you have chosen your desired function, press the ENTER
button to confirm the change.
Menu Map
Auto
↔
AutP: PAR auto
operation
↔
AP01-AP13: PAR light
effect
↔
S01-S32: PAR light speed
AutF: Laser auto
operation
↔
AF01-AF07: Laser
effects
↔
S01-S32: Laser
effect speed
↔
N00-N09:
Motor speed
AutN: Light set
auto operation
↔
AN01-An10: Light
effects
↔
S01-S32: Light
set speed
↔
N00-N09:
Motor speed
Sou
↔
SouP: PAR sound
activated
↔ SP01-SP13: PAR light effect
SouF: Laser Sound
activated
↔ SF01-SF07: Laser light effect
SouN: Light set
sound activated
↔
SN01-SN10: Light set sound activated
COL
↔
COLO
↔
R 0-255
Red
G 0-255
Green
B 0-255
Blue
W 0-255
White
S00-32
Strobe
N01-32
Motor speed
