Manual - SA Amplifier Series
4
© Lotronic 2020
EN
1.
XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2.
RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3.
SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
4.
MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs,
the impedance of each speaker must be 8ohms at least to protect the amplifier.
5.
LINK output: Connect the XLR input signal to another amplifier.
6.
Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
SPECIFICATIONS:
Model
SA500
SA1000
SA2000
Max. power
2 x 250W
2 x 500W
2 x 1000W
S/N ratio
> 76dB
> 76dB
> 76dB
Frequency range
20Hz-20kHz
20Hz-20kHz
20Hz-20kHz
THD
<0.1%
<0.1%
<0.1%
Impedance
4 ohms min.
4 ohms min.
4 ohms min.
Protection
3A fuse
5A fuse
5A fuse
Power supply
230V~50Hz
230V~50Hz
230V~50Hz
Dimensions
48.5 x 30 x 10cm
48.5 x 28 x 9cm
45 x 43 x 9
Weight
5.08kg
5.57kg
9.34kg
Please Note:
Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local author-
ities or your dealer about the way to proceed.