Manual - SA Amplifier Series
3
www.ibiza-light.com
EN
3
CONTROLS
xxxx
1
2
3
1.
Power: Press this button to power ON/OFF the unit.
2.
L Volume: Use this knob to adjust the volume of left channel of main speaker output
3.
R Volume: Use this knob to adjust the volume of right channel of main speaker output.
REAR PANEL SA500 & SA1000
1
4
3
2
3
5
5
6
1.
XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2.
RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3.
1/4” Line input: Use suitable jacks to connect the line signal source to the 1/4” line input of the amplifier.
4.
SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
5.
MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs,
the impedance of each speaker must be 8ohms at least to protect the amplifier.
6.
Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
REAR PANEL SA2000
1
2
4
5
3
6