18
18
Ripley Swingarm Removal
Note:
Special tools are needed to remove
and replace the Ripley bearings in
the seat tube and in the swingarm.
Please do not attempt to remove
and replace these bearings.
Instructions on removal and rein-
stallation of the bearings using a
special Ibis manufactured tool will
be added to this instruction book at
a later date.
To reinstall the swingarm, work in the
reverse order.
Add grease to the core when reinstalling,
and a lightly grease the inner lip of the
eccentric cap.
Don't forget the two spacers that go
between the BB30 bearings in the
seat tube.
The chamfered hole on the cap aligns
with the threaded hole on the eccentric
core. Use blue loctite on the bolt.
