ibis Mojo Sl-R, Instruction Book

Page: 37 / 61

37
Maintenance
• Loctite 242 blue thread locker or
anti–seize (depending on model of
bike)
Linkages
The upper and lower links for the
HDR are more robust versions of the
ones used on the Mojo SL and Mojo
SL-R. Please don’t try to mix and
Working on Ripley
This information is shown in a video:
http://tinyurl.com/n8f9o4p
Should you find it necessary to
replace any of the bearings on the Ri-
pley eccentric linkages, you will need
to remove the swingarm. For that, you
will need the following tools:
• 12mm open end wrench
• 2 x 6mm Allen wrench
• 1 x 5mm Allen wrench
• 2 x 4mm Allen wrenches
Bearing Replacement:
Please refer to the section on Ripley
Swingarm Removal on pages 46–47.
Complete instructions can be found on
this video:
http://tinyurl.com/n8f9o4p
or on our website at
http://www.ibiscycles.com/support/
technical_articles/ripley_bearing_
replacement/
Ripley Bearing Specs:
Eccentric Core Inner Bearings:
• 6806-2RS (30 x 42 x 7)
These are the same as BB30 bearings.
Lower outer bearings
• 608-RS 8x22x7
These mount in the swingarm and
can be found in skate shops.
Upper outerbearing
• 698-RS 8x19x6
These mount in the swingarm and
can be found in skate shops.
Working on Mojo SL, SL-R, HDR
This information is shown in a video:
http://tinyurl.com/mon4oqt
The link assemblies on the Mojos are
designed to be easily removed and
replaced. Be sure to purchase a fresh
link set before removing the old ones to
skip any downtime. There are no bear-
ings to press out, nor any axles to ham-
mer. New Lopes Link (upper) and lower
pivot assemblies are available in the
buy section of our website, or you can
have your dealer order them from Ibis
for you. Replacement is super simple
and requires these common tools:
• 2x 4mm Allen wrenches
• 2x 6mm Allen wrenches
• 2x 5mm Allen wrenches