![iBike Newton+ Operating Instructions Manual Download Page 52](http://html1.mh-extra.com/html/ibike/newton/newton_operating-instructions-manual_3254178052.webp)
Copyright Velocomp LLP 2005-2013
51
I PURCHASED A FIRMWARE KEY FOR MY . WHAT HAPPENS NEXT?
You will receive an email asking you to send us the serial number of your . After
we receive your serial number we will email your firmware key to load into your
with Isaac software.
WHAT IS “TOTAL VERTICAL CLIMBED”?
Any time you climb, the will accumulate the amount of elevation gain.
Example: You climb a 100 foot hill, then descend 50 feet downhill, then slowly climb
another 25 feet, and then ride back to your starting spot, descending 75 feet along
the way. The will show your Total Vertical as 100 + 25 = 125 feet.
DOES “TRIP RESET” ZERO-OUT SETUP, CALIBRATION, AND PREVIOUS RIDE
DATA?
No! Your total odometer, tilt and coast down calibrations, wireless IDs, and other profile
information are unaffected by trip reset. Also, any ride files recorded from prior rides is
unaffected.
IS THE SUITABLE FOR RAINY RIDES?
Yes! Your was designed to be water resistant so don’t worry if you get it wet. If
the front port becomes filled with water your power readings may be wrong. To correct
this problem, remove your , blow the water out of the front port, and dry your
mount and underside of the with a dry cloth. Replace and continue on your ride.
TIP
: IF YOU RIDE OFTEN IN RAINY CONDITIONS, CONSIDER PURCHASING THE OPTIONAL
REMOTE WIND SENSOR (RWS). THE RWS WILL KEEP RAIN FROM FILLING THE
’S WIND PORT AND WILL IMPROVE WATTS ACCURACY DURING RAINY RIDES.
HOW DO I HARD RESET THE ?
Your contains a microprocessor. It is possible,
though extremely unlikely
, that
your might “freeze”. Symptoms of a freeze include: the buttons do not function
properly, the screens are frozen, or you can’t download rides. A Hard Reset will fix this
problem.
To do a “hard reset” press-hold the left, bottom, right, and center buttons
simultaneously.
The screen will go blank. Release the buttons to restart.
NOTICE:
AFTER YOU DO A HARD RESET YOU WILL NEED TO RESET THE DATE AND
TIME IN YOUR . HOWEVER, YOU WILL NOT NEED TO RE-ENTER
WEIGHT, TIRE CIRCUMFERENCE, AND CALIBRATION DATA. THAT DATA IS
STORED PERMANENTLY IN THE ’S NON-VOLATILE MEMORY. ALSO, ALL
OF YOUR STORED RIDE FILES WILL REMAIN IN YOUR AFTER A HARD
RESET.
OTHER QUESTIONS?
Please contact us anytime with your questions: