background image

TECHNICAL SERVICE & SUPPORT BULLETIN

T.S.S.B. NO.

1019

DATE:

5/31/07

MODEL:

PATRIOT 25HC, 12HR, 38HC, 25E, 27HS, 62C

SUBJECT:

ROHS & NON-ROHS MAIN P.C. BOARDS

PAGE:  1 of 1

The Patriot laminators manufactured

with (S/N#SK) and below

 will continue to use

the

 non ROHS

 complaint Main P.C. Boards. Listed below are the part numbers to use

when ordering.

25HC P/N# 706011106

12HR P/N# 706011106

38HC P/N# 706011106

25E P/N# 1722914

NOTE:

 The Patriot 25E and the Ultima 65-1 use the same Main P.C. Board. The triac that

comes with this kit is not used on the Patriot 25E. It can be used with the Ultima 65-1.

Patriot laminators manufactured with

 (S/N#SL) and above

 will use the

 ROHS

compliant Main P.C. Boards. Listed below are the part numbers to use when ordering.

25HC P/N# 638900406

12HR P/N# 638900406

38HC P/N# 638900406

25E   P/N# 638900405

Note:

 All ROHS compliant Main P.C. Boards can use the same Infrared heat Sensor P/N#

639400018

There are two models of the Patriot laminators that are compatible for both before and

after ROHS compliant Main P.C. Boards. These part numbers stay the same.

27HS P/N# 706011011

62C P/N# 706011145

10303 80

th

 Avenue, Pleasant Prairie, WI 53158 • PH 800-723-4000 • fax 888-821-3736 • www.gbc.com

Summary of Contents for Patriot 25E

















































Reviews: