[AUTHOR NAME]
7
CARE AND MAINTENANCE
1.
Lubrication of all moving parts is essential to the longevity and optimal performance of
your Machine. Initial lubrication of some parts of your item have been done at the
factory, but the weight stack guide rods must be lubricated at the time of assembly. We
recommend a clear aerosol or silicone spray.
Note:
Do not use oil based lubricants as they will attract dust, dirt and grime, and will
eventually gum up and erode bushings and sealed bearings.
2.
All pulleys and bushings should be checked regularly for signs of wear.
3.
Check and adjust cable tension periodically as it will maintain proper anatomical
function.
4.
Periodically check all moving parts, upholstery and grips for signs of wear or damage.
If there is a problem or replacement part which is necessary, STOP USING THE
EQUIPMENT and immediately contact your local retailer. Replace parts using only
genuine parts.
5.
All chrome plated surfaces should be cleaned regularly to prolong the life and luster of
the finish. Wipe equipment down with a damp cloth and dry thoroughly each day. At
least once a week your chrome equipment should be polished with a commercial grade
or automotive type chrome polish.
6.
When checking the bolts and nuts, be sure they are all fully fastened. If there is a bolt
or nut that continuously loosens obtain a replacement through your local retailer.
7.
Check welds to be free of cracks.
Failure to perform routine maintenance could result in personal injury and/or
equipment damage.
