2.2. Safety Information
Before installation:
Read this manual completely and gather all information available on the product. Make
sure it is fully understood. Check that your application does not exceed the safe operating
specifications for the product.
SAFETY DURING INSTALLATION
The product must be installed and operated by qualified service
personnel and installed into an apparatus cabinet or similar, where access
is restricted to service personnel only. For Ibex products, outdoor
installation is allowed.
Before energising and connecting communication cables to the product,
ensure a protective earthing conductor is first connected to the
protective earthing terminal (only valid for metallic housings). Westermo
recommends a cross-sectional area of at least 4 mm
2
.
Upon removal of the product, disconnect the product from the power
supply and all other communication ports before disconnecting the
protective earthing conductor.
HAZARDOUS VOLTAGE
Do not open an energised product. Hazardous voltage may occur when
connected to a power supply.
PROTECTIVE FUSE
The power supply wiring must be sufficiently fused.
It must be possible to disconnect manually from the power supply. Ensure
compliance to national installation regulations.
POWER SUPPLY CONNECTION
There are safety regulations governing the power source that can be used
in conjunction with the product. Refer to chapter Interface Specifications.
Ibex-RT-330-5G Series
5
