QUICK START GUIDE
2022-1.0
IBEX EQUIPMENT CO.
ASSEMBLY TIPS
Use the diagram attached to the red sheet metal guard to understand the
orientation of the lift arms.
Pay special attention to the spacing of the pins on
the two long arms
as they are different and must be in the correct orientation.
Be sure to remove the shipping brackets shown in Figure 1. Failure to remove
the inner shipping bracket may cause damage to the machine, as the lift arm can
contact and push downward on the drum unit. Use the same bolts to secure the
red guard to the drum unit after removing the brackets.
Refer to Figure 2 to understand PTO shaft orientation.
As with any new implement, the shaft that attaches to the tractor may need to
be cut to length. Contact us if guidance is needed.
