background image

%(67

Electrical & Automation

IBEST ELECTRICAL CO.,LTD

Digital Temperature ControllerUser Manual

TCL SERIES

P

4

www.ibestchina.com

9.INSTRUMENT MAINTAINANCE AND STOCK

Before installing and using this instrument, please read this user manual carefully in order to operate the unit in 
the appropriate conditions to avoid any damage. Keep this user manual for future reference.
●  When clean the instrument, make sure the power is at “OFF” status.
●  To clean out the dust or dirt on the instrument screen, please use soft cloth or cotton papper.
●  Do not touch the instrument screen by hard objects to avoid scratch of the screen. 
●  Do not use screw driver or hard pin to touch the soft buttons on the faceplate.
●  From the date of shipping, if there are any damages or fault within 18 months, the factory is bond to matain 
    the units. But if the danages re coused by inappropriate operation by use, the factory doesn’s.The instrunent     
    should be stock in the dry ,non gas environment.

Summary of Contents for TCL SERIES

Page 1: ...der normal conditions Optional instrument size 48W 48H 48W 96H 72W 72H 96W 48H 96W 96H mm Apllication ranges food beverage oven furnance plastic extruder chemicals processing heating process etc For temperature measuring and control 2 ORDERING CODE T C L R 1 4 K R Temperatrue controller L series S K Relay control output Ssr control output Scr control output 4 6 7 8 9 K P One alarm K E J thermocoup...

Page 2: ...cition adjustment Enter into measuring status Set temperature Press key the upper LED display SP lower LED display set value press or to modify the value you need Then confirm the value by press key again Control parameters Press key for 5 seconds the upper LED display the control parameters the lower LED display the parameters value To modify the parameters value please press and key Press key to...

Page 3: ...t Relate the heating equipment s capacity temperature increase time thermocoule position proportion band etc usually for big inertial objects cr should be bigger When P 0 Cr 0 is time proportion control 7 DIMENSION AND INSTALLATION HOLE DIMENSION unit mm W H D L C a b MODE DIMENSION INSTALLATION HOLE DIMENSION a b TCL 14 TCL 16 TCL 17 TCL 18 TCL 19 W H C D L 48 48 96 96 96 48 72 72 48 96 45 45 93 ...

Page 4: ...clean the instrument make sure the power is at OFF status To clean out the dust or dirt on the instrument screen please use soft cloth or cotton papper Do not touch the instrument screen by hard objects to avoid scratch of the screen Do not use screw driver or hard pin to touch the soft buttons on the faceplate From the date of shipping if there are any damages or fault within 18 months the factor...

Reviews: