Iberspa Hotel Spa, Manual

Page: 9 / 37

11
ENG
Remember that operating the hot tub increases the humidity in the room in which it
is located. Therefore, it is advisable to have a ventilation system to prevent any
build-up of humidity that may damage nearby elements.
Using the cover reduces heat loss and the humidity in the area.
IN-GROUND VERSION
The hot tub's frame should never be fixed to the ground. The hot tub contracts and
expands due to temperature changes. Fixing the hot tub to the ground may cause
irreparable damage and cracks in the acrylic shell. It should simply be put in place
and settle under its own weight in the desired location. Do not lift or handle the hot
tub by its upper edge.
When the hot tub is properly seated in position, finish the works, bearing in mind that
you must leave a clearance of at least 400 mm around the shell for possible
maintenance. Never place any items there that could touch the hot tub's shell, pipes
or accessories. Leave an access hatch or way to access the area around the hot tub
for maintenance work. This area should be at least 700 mm.
You can finish the work with tiles or similar, ensuring that the area around the hot
tub's shell never comes into direct contact with anything that you install (you should
leave at least 1 centimetre all around it).
To seal the hot tub's rim, use a special elastic sealant for water installations.
3
ATTENTION
Do not leave the hot tub empty and uncovered at temperatures above 20ºC
or below 4ºC.