Iberna HOF605.1SS, User Manual

Page: 22 / 32

22
o
Electricity At Work Regulations.
Electrical connection
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance should be wired into a 13A double pole switched
fused spur outlet, having 3 mm contact separation and placed in an
easily accessible position adjacent to the appliance. The spur outlet
must still be accessible even when your oven is located in its
housing.
o
To connect the oven power cord, remove the
cover on the terminal block, in order to gain
access to the contacts inside. Make the
connection, securing the cord in place with the
cable clamp provided and then immediately
close the terminal block cover again.
o
Connect the wires as indicated in the image above, using the brass
links provided where necessary.
o
The earthing (yellow/green) conductor must always be 10 mm
longer than the line conductors.
o
Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o
If the mains supply cable is damaged, then it must be replaced by
an appropriate replacement which can be obtained from the Spares
Department.