iBell GG30-01, Operator'S Manual

Page: 8 / 9

7

Keep the product clean. Do not use chemical, alkaline, abrasive
or other aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces. Clean the
product with a dry cloth.

Always store the product in a place that is inaccessible to
children
(They may consider it as a toy and the next thing it
could happen is obvious).

Keep feeding mechanism and melt chamber free from dirt and
other foreign debris.

Do not pull glue stick from the back of the glue gun . The feed
mechanism may be damaged or impaired. If you desire to change
types of glue, cut off the protruding end and feed the remainder
through with the new type of glue.

Replace the nozzle if glue drips excessively. Do not attempt to
change nozzle when glue is cold. To change, the gun must be
heated until the glue is softened enough to remove nozzle.

Glue Gun leaking: This is due to some non-critical factors can
contribute to leaking (such as incorrect temperature settings or
loose nozzles). This can be a sign that the internal dispensing
parts have worn out or have become damaged.

Temperature Gauge Issues: If your hot melt is too thin or too
tacky, despite being set to the right temperature, the temperature
regulating mechanisms may be broken.

Pneumatic Pressure Issues: You can gauge the pressure on many
pneumatic guns to ensure you aren’t overloading your tool.

Electrical Supply Failure: This is due to a damaged supply cord.
TROUBLESHOOTING
MAINTENANCE AND REPAIR
IBL GG30-01
CLEANING AND STORAGE
WARNING!
All further inspection and repair work must be
performed by an authorised service centre or a qualified technician!