1.800.221.0932
|
2
Dashcam
Wiring
:
WIRING
(Figure A)
1.
Mount the dash
cam
era
to the windshield
using the provided double side
d
tape.
It is suggested to clean the windshield first
with an alcohol wipe.
2.
Run the wire and plug in the DC plug to obtain
power to the dash
cam
era
.
3.
Position the 360 degree camera.
4.
Run the extension wire to the rear of the
vehicle for the rearview camera.
5.
Mount the rearview camera outside near the
center of the vehicle.
It is suggested the
camera be mounted outside. Th
e
camera will
be recording the rear visual
,
but also works as
a backup camera.
6.
Connect the RED wire on the extension cable
to a reverse trigger
i
n the vehicle. This will
trigger the reverse input on the dash
cam
era
and the rear visual will go full screen and
provide guidelines.
When it is triggered, the
LEDs activate.
RED - Reverse Trigger
18 ft
12 ft
20 in