iBeam TE-360, User Manual, Page: 12 / 16

11
2). After completed the adjustment of the panorama the cursor will move back to correction of panorama,
ensure that nobody is surrounding the vehicle and then press the OK button, the calibration is complete
(shown as below), and then save →
Note: If a camera fails to detect the appearance of a template, please check the reason in the following
ways:
lens if there is dust and dirt.
3. according to the system reminder, return to recalibrate again.
checker
board cloth
front
measuring tape
Note:
1 Note that the exact binding site of the measuring tapes
2 left and right tapes should be put close to the wheels
3 the checkerboard cloth should put on the binding sites of the integer on
the tape.
start
end
vehicle width
vehicle length
517cm
160cm left offset
right
offset
160cm
one key for joint
return
200cm