6.2. USING ELECTRIC APPLIANCES:
WARNING:
Make sure that the appliance is switched OFF before connecting it to the generator.
Do not move the generator while it is running.
6.2.1. AC APPLICATION:
6.2.2.
Check the volt meter for sufficient voltage.
6.2.3.
This generator is properly tested and adjusted and
set at the factory.
6.2.4.
If the generator does not produce the specified
voltage please contact your local dealer.
6.2.5.
Turn off the switch(es) of the electrical appliance(s)
before connecting to the generator.
6.2.6.
Insert the plug(s) of the electrical appliance(s) into
the receptacle/socket.
6.2.7.
Check the amperage of the receptacles/sockets used
making reference to the TABLE and be careful not to take a
current exceeding the specified amperage.
6.2.8.
Check that the total wattage of all appliances that is
being connected to the generator does not exceed the
rated output of the generator.
6.2.9.
Turn on the appliance switch.
NOTE:
If the circuit breaker "TRIPS" during operation the generator is overloaded or the
appliance is defective. Stop the generator immediately and check the appliance and /or
generator for overloading.
CONTROL PANEL
IB-G3500
DIGITAL
METER
AC SOCKET
CIRCUIT
BREAKERS
ENGINE SWITCH
12V OUTPUT
GROUND TERMINAL
ON
OFF
