IBCcontrol F21100304, Manual

Page: 22 / 32

DISCRETE INPUT
1-bit status registry (Read).
Modbus function 02 "Read Input Status" is used for reading.
Reads 1 if a fault has occurred.
0 = normal
1 = alarm
Address Name Designation Data
form Read/
Write Factor Unit
1 Error Error regardless of which fault
has occurred. Single bit Read
2 Tripped control Control has tripped and cannot
reset itself Single bit Read
3 Motor temperature Motor overheating Single bit Read
4 Low temperature Low temperature in the control
unit Single bi Read
5 Overheating AC Overheating in the control unit Single bit Read
6 Under-voltage AC Low supply voltage Single bit Read
7 Voltage surge AC High supply voltage Single bit Read
8 Surge Several surge events Single bit Read
9 Rotation monitor Alarm, rotation monitor Single bit Read
10 Rotating rotor Rotor rotates on resetting Single bit Read
11 Excess current Excess current in the motor Single bit Read
12 Overload, fast
Overload
Single bit Read
13 Overload Overload Single bit Read
14 Underload Push load Single bit Read
15 Motor control Error in motor control Single bit Read
Continued on next page
21
20