IBC VFC 15-150, Manual

Page: 71 / 84

6-3
DIAGRAMS
VFC 15-150 - VFC 45-225 MODULATING GAS BOILERS
ITEM # DESCRIPTION PART # qTY
5 Fan nrg 137 240-048 1
10 o-ring 150-073 1
15 Fan adapter Plate 180-023 1
20 screw, M4x10 tapping, Flat
Head, equipped w/Fan
3
25 air intake Base 180-017 1
30 swirl Plate 180-020 1
35 air intake Cover 180-018 1
40 gas Valve 180-022 1
45 spacer, #8, 1/8” thick, 1/4” od 150-092 3
50 screw, M4 x 30, tapping,
equipped w/gas Valve
3
55 screw #10-32 x 7/8” Hex Head 150-110 4
60 gasket, Fan - Fan Coupler 250-381 2
65 Fan Coupler spacer 250-370 1
70 nut, #10-32, With external tooth
Washer
150-111 4
75 switch, snap disk, Manual reset,
230F
240-030 1
80 switch, snap disk, auto-reset,
203F
240-032 1
85 Mounting Plate, snap disk 250-333 1
90 ignition Module (alternate
Capable Controls 240-049)
240-004B 1
95 screw, sheet Metal, #8 x 3/4” 150-102 2
100 sensor, Water Pressure 240-006 2
105 enclosure 250-312 1
110 Mounting Bracket, gas Valve 250-316 1
115 sensor, air Pressure 240-003 1
120 transformer 240-008 1
125 side Cover, Controller 250-327 1
130 screw, #6-32 x 3/8” 150-014 6
135 Chassis, Controller 250-107 1
140 PCB, Controller 230-001 1
145 spacer, Male-Female, #6-32 x
3/4”
150-096 4
150 Front Cover, Controller 250-108 1
155 Pipe Clamp 150-039 3
160 2” aBs intake assembly 1
165 Clip nut, M10, 19mm Center 150-105 4
170 Heat exchanger 170-009 1
175 refractory, outer 250-287 1
180 refractory, inner 250-306 1
185 gasket, Heat exchanger lid 250-328 1
190 lid, Heat exchanger 250-284 1
195 screw, M10 x 55, Hex Head 150-106 4
200 Washer, Fender, M10 150-104 4
205 ignitor 240-002 1
210 gasket, ignitor 250-050 1
ITEM # DESCRIPTION PART # qTY
215 screw, M4 x 8 150-091 4
220 sight glass Holder 250-309 1
225 gasket, sight glass 250-060 2
230 sight glass 250-059 1
235 gasket, Burner 250-308 2
240 Burner 180-021 1
245 V-Clamp 150-071 1
250 Fan Coupler 250-280 1
280 Front Cover, VFC 225 250-315 1