INSTALLATION AND OPERATION INSTRUCTIONS
2
SL 26-260 G3, SL 40-399 G3 MODULATING GAS BOILERS
SAFETY CONSIDERATIONS
Installation, start-up and servicing of IBC boilers must be performed by competent,
qualified, licensed and trained heating technicians.
Failure to read and comply with all instructions and applicable National and local codes
may result in hazardous conditions that could result in property damage and injury to
occupants which in extreme cases might result in death.
HAZARDS & PRECAUTIONS
WARNING
If the information in this manual
is not followed exactly, a fire or
explosion may result causing
property damage, personal
injury, or loss of life.
WARNING
Points out a potentially
hazardous situation which must
be avoided to prevent serious
injury or death.
CAUTION
Points out a potentially
hazardous situation which must
be avoided to prevent possible
moderate injury and/or property
damage
NOTE
Points out installation,
maintenance and operation
details that will result in
enhanced efficiency, longevity
and proper operation of your
boiler.
DANGER
Points out an immediately
hazardous situation which must
be avoided in order to prevent
serious injury or death.
• 1 x Wall mounting bracket
• 1 x Condensate trap assembly
• 1 x 30 psig pressure relief valve
• 1 x Outdoor temperature sensor
•
6 x 1/4” x 2 1/2” Lag screws/w flat
washers
• Installation and Operating Instructions
Manual
• User Manual
• V10 Touchscreen Operating Instructions
Manual
Supplied with the boiler
- The IBC boiler is shipped with an accessory parts kit
consisting of the following items:
