IBC EBX Series, Installation And Operation Manual, Page: 41 / 68

41
7.0 About the boiler controller
Note
Use a finger to interact with the controller buttons.
The controller provides:
Home Page display of the Target, Outlet and Inlet temperatures
Status Page displaying Output power (in %)
Set-Point temperature regulation
Easy-to-set Outdoor Reset control
Heat Enable from Thermostat
Error Message Reporting
Warning Message Reporting
Unit selection for °F or °C
7.1 Controller
When the boiler is first energized, the controller will go through a brief power up sequence. During this
time the controller is completing a self-diagnostic and loading all previous settings. In the event of a
power interruption the boiler will automatically resume operation when power is restored with all the
previously stored values.
The controller provides overall management of the boiler operations including:
Power-up and self-diagnostics
Safety management systems, call-for-heat management
Real time boiler data
Temperature and throttle operation. The variable power level will be based on the flow rate
measured and the required outlet temperature.