IBC SOLAR AeroFix Series, Installation Instructions Manual

Page: 4 / 74

4
Version 20.01, 20-July-2020
2. Tool list

Cordless screwdriver with various bits (Torx 40, SW8 socket, SW15 socket,...)

Bit holder 300 mm

Pencil

Tape measure

Folding rule

Plumb line

Angle grinder with diamond grinding wheel

Torx screwdriver with T-handle, size TX40

Torque wrench

Assembly gloves

Assembling jig

Static friction measureing device (in the planning phase)
3. General information, standards and regulations
The IBC AeroFix / AeroFlat flat roof system is for mounting solar modules onto flat roofs and pitched roofs.
The modules are attached on supports or base rails using clamps.
The number of parts varies depending on installation size..
Important information:

Your IBC AeroFix / AeroFlat flat roof system will be delivered complete with all accessories!

Before you begin, please check that all parts are included by using the attached packing list and
parts list.

Electrical work must be carried out by a qualified electrician!

The processing guidelines and in individual cases specific guidelines from the relevant
manufacturer for the roofing and modules must be adhered to!