Hardware Configuration
SP-63ER User Manual
13
2
2.1.6
Memory
The MBD63E motherboard housed in the SP-63ER supports two DDR4
memory sockets situated right beside the processor. To install the memory
modules, locate the memory slot on the board and perform the following
steps:
1. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
2. Gently push the module in an upright position until the clips of the slot
close to hold the module in place when the module touches the bottom of
the slot.
To remove the module, press the ejector tabs outwards with your fingertips to
eject the module.
2.1.7
Mini-PCIe & M.2 Cards
1. Locate the M.2 slot inside the device.
2. Align the key of the M.2 card to the interface, and insert the card
slantwise.
3. Fix the M.2 card with an M3 screw.
M.2: