IBASE Technology SI-606-M User Manual Download

Page: 9 / 96

SI-606 User Manual

CHAPTER 1 INTRODUCTION

1.1 General Description

The “Signature Book™” SI-606 is a professional digital signage system powered

by 4

Gen. Intel

Core

I Desktop Processors with AMD Radeon™ E8860 graphics.

The SI-606 integrates six (6) DP ports with independent video output and one DVI-I

for console. Additionally, SI-606 has two quad-channel DDR3L-1600 sockets to

provide up to 32GB of memory. It also has dual Gigabit Ethernet, dual extended SSD

drive, Intel AMT for remote control

and IBASE’s iSMART green technology for power

on/off scheduling and power resume functions. The ruggedized designed chassis

provides passive cooling for better system reliability and quiet operation.

SI-606 overview

Summary of Contents for SI-606-M





























































































Search results

Summary of Contents for SI-606-M

Reviews:

Related manuals for SI-606-M

Brands by name

Popular brands

IBASE Technology SI-606-M, User Manual

Search results

Summary of Contents for SI-606-M

Reviews:

Related manuals for SI-606-M

Brands by name

Popular brands