IBASE Technology SI-313-NQC, User Manual

Page: 23 / 71

Motherboard Information
SI-313 Series User Manual 15
2
2.1.3 WiFi / 3G / 4G Antenna Installation
Thread the WiFi / 3G / 4G antenna extension cable through an antenna hole
of the front I/O cover and fasten the antenna as shown below. Then apply
adhesive to the edge of the hex nut behind the front I/O cover to prevent the
extension cable from falling if the cable becomes loose.
1. Thread and fasten the hex nut and the
washer. Then install the antenna.
2. Apply adhesive around here.
Info:
The diameter of the nut is around 6.35 mm (0.25”-36UNC).