IBASE Technology SI-313-DC, User Manual

Page: 18 / 68

10 SI-313 User Manual
2.1 Essential Installations Before You Begin
2.1.1 Memory Installation
There are two SO-DIMM DDR4 memory slots inside SI-313 for a maximum
total memory of 32 GB. To install the modules, locate the memory slot on the
board and perform the following steps:
1. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
2. Gently push the module in an upright position until the clips of the slot
close to hold the module in place when the module touches the bottom of
the slot.
To remove the module, press the clips outwards with both hands.