6757 - 1080P Zmax MicroCam
NOTE:
Ensure the unit is fully charged (about 6-8 hours) and plug-in an SD card (up to 256GB).
HOW TO FORMAT HIGH CAPACITY SD CARDS (64-256GB):
1. Insert an SD card and plug the device in for power, but do not turn it on. The orange charge
light will come on.
2. Insert a pin or something small and thin into the “Upgrade” hole and release when the orange
charging light starts to flash red.
3. Press the “Upgrade” button again and release it when the flashing red light starts to flash
green.
4. Disconnect the camera from the power source, and the SD card will now be formatted for use
with this camera.
HOW TO TURN ON THE CAMERA:
1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
green color; once the indicator light is flashing green, the device is now recording.
NOTE:
The camera’s default record mode is Continuous Record mode.
HOW TO TURN CAMERA OFF:
1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
orange color; once the orange color is gone, the camera is now off.
SpyCentre Security® Since 1993
1-800-292-77488
