![background image](http://html1.mh-extra.com/html/ibase-technology/si-18-series/si-18-series_user-manual_3223013009.webp)
9
Components
I/O View
Refer to the diagram below to identify the components on this side of the system.
DVI
The Digital Visual Interface (DVI) port supports a high quality VGA-compatible
device such as a monitor or projector to allow viewing on a larger external
display.
LAN
The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection
to a local network.
COM
Communication or serial port is compatible with RS-232 interface without RI (ring
indicator) signal.
USB
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mouse devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with some peripheral acting
as additional plug-in sites or hubs.
AUDIO
The stereo audio
jack (3.5mm) is used to connect the system’s audio out signal to
amplified speakers or headphones.
DC-IN
The supplied power adapter converts AC power to DC power for use with this
jack. Power supplied through this jack supplies power to the system. To prevent
damage to the system, always use the supplied power adapter.
Summary of Contents for SI-18 Series
