6
SA-101
2.
Power On
Step 1: Plug the HDMI cable into Player, and plug another end of HDMI cable into
HDMI port of your TV.
Step 2: For remote control, use any of your USB mouse/keyboard/wireless receiver
etc. and connect to the USB port of Player.
Step 3: Install your MicroSD/TF Card if you have.
Step 4: Use provided AD/DC power adaptor and power cable to apply power to the
Player.
Step 5: Turn on TV and set TV input source to the selected HDMI port.
After a moment, you will see main desktop in the screen as follow and you can play.
3.
Default Function
When the Player is started, system will run default function. Some Players
are loaded with standard Android and you can use it as typical Android devices.
Then you can skip below and go to section 4.
However, some Players are pre-loaded with demo APK “AdPlayer” to
playback video and picture contents looping endlessly. These media files are
pre-loaded of can be loaded/updated.
If the Player does not have media contents pre-loaded, the below screen will
show up.
3.1.
Update new media files
Summary of Contents for SA-101-N
Page 11: ...11...