Hardware Configuration
MPT-7000V User Manual
17
2
1.
Locate the mini-PCIe slot, align the key of the mini-PCIe card to the
interface, and insert the card slantwise.
(Insert the M.2 network card in the same way.)
2.
Push the mini-PCIe card down, fix it with the supplied 2 flat head screws
for full-sized card and with one screw for half-sized card.
(Fix the M.2 network card with a supplied round head screw.)
2.1.5
WiFi / 3G / 4G Antenna Installation
Thread the WiFi / 3G / 4G antenna extension cable through an antenna hole
of the front I/O cover and fasten the antenna as shown below. Then apply
adhesive to the edge of the hex nut behind the front I/O cover to prevent the
extension cable from falling if the cable becomes loose.
1. Thread and fasten the hex nut and the
washer. Then install the antenna.
2. Apply adhesive around here.
Info:
The diameter of the nut is around 6.35 mm (0.25”-36UNC).