![background image](http://html1.mh-extra.com/html/ibase-technology/mi997af/mi997af_user-manual_3370435004.webp)
iv
MI997AF User’s Manual
Important Safety Information
Carefully read the precautions before using the board.
Environmental conditions:
Use this product in environments with ambient temperatures between
0
˚
C and 60
˚
C.
Do not leave this product in an environment where the storage
temperature may be below -20° C or above 80° C. To prevent from
damages, the product must be used in a controlled environment.
Care for your IBASE products:
Before cleaning the PCB, unplug all cables and remove the battery.
Clean the PCB with a circuit board cleaner or degreaser, or use cotton
swabs and alcohol.
Vacuum the dust with a computer vacuum cleaner to prevent the fan
from being clogged.
WARNING
Attention during use:
Do not use this product near water.
Do not spill water or any other liquids on this product.
Do not place heavy objects on the top of this product.
Anti-static precautions
Wear an anti-static wrist strap to avoid electrostatic discharge.
Place the PCB on an anti-static kit or mat.
Hold the edges of PCB when handling.
Touch the edges of non-metallic components of the product instead of
the surface of the PCB.
Ground yourself by touching a grounded conductor or a grounded bit
of metal frequently to discharge any static.
CAUTION
Danger of explosion if the internal lithium-ion battery is replaced by an
incorrect type. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions or recycle them at a local recycling facility or
battery collection point.
Summary of Contents for MI997AF
